Motion Design · Nov 6, 2026
THIS IS F*CKING INSANE I had Claude Code build a robot manta ray. Its fins swim in a real wave, front…
THIS IS F*CKING INSANE I had Claude Code build a robot… by Vorzen. Watch the Motion Design video, explore the shared prompt and visit the original X post.
Vorzen@0xVorzen
View on XTHIS IS F*CKING INSANE I had Claude Code build a robot manta ray. Its fins swim in a real wave, front to back, and all 16 fin rays read one number. Last time it was a dragonfly with 4 wings on one crank. This one is harder: a fin isn't a wing, it's a surface that has to bend. The rule from this article again: every part is a function of one input. Here it's motor rpm. One camshaft, 8 cams, each lifts a pair of fin rays. Nothing else is typed in. > fin beat: 3,600 rpm ÷ 60 ÷ 60 = 1.0 Hz > stroke: asin(2.1 / 5.0) = ±24.8° at the tip > wave: 8 cams 20° apart, so it runs front to back in 0.39 s > sprint: 5,400 rpm = 1.5 Hz, same wave, faster > glide: 0 rpm, the cams stop and the fins hold The fin surface is rebuilt every frame from the camshaft angle. Gear ratio and cam sizes are mine, it's a design, not a real product. The prompt: "Build a robot manta ray in three.js, rendered with Remotion, with a light field-simulator dashboard. One input: motor rpm. A 60:1 gearbox turns one…
The prompt behind it.
Original prompt
Build a robot manta ray in three.js, rendered with Remotion, with a light field-simulator dashboard. One input: motor rpm. A 60:1 gearbox turns one camshaft with 8 cams 20° apart, each cam lifts one fin ray on both sides. Rebuild both fin surfaces every frame from the camshaft angle. Show fin beat, wave time and stroke as live gauges. Modes: spool up, cruise, sprint, exploded, glide. Print every computed number as a check.
Video and prompt by Vorzen. Original post ↗


