Motion Design · Nov 12, 2026
this article lists 5 machines the author hasn't built yet. so I built #3: a car differential on a turn.
this article lists 5 machines the author hasn't built yet. so I built #3: a car… by Cortex. Watch the Motion Design video and visit the original X post.
Cortex@0xCortexq
View on Xthis article lists 5 machines the author hasn't built yet. so I built #3: a car differential on a turn. no CAD file. no imported model. Claude wrote every gear as code, then I took it apart. what I did, straight from the article: → the model first: one function, real numbers, checked by hand → 41-tooth ring, 10-tooth pinion: 4.1 to 1 → turn radius 8 m: inner wheel 225 rpm, outer 273. the average is always the carrier, 249 → going straight, the spider gears don't spin at all. in the turn they spin 38.5 rpm → every gauge, chart and label reads from that one model. nothing is animated by hand → then a still at every beat to catch parts passing through each other and the part that breaks it: put one wheel on ice. the wheel with grip stops at 0 and the other spins at 497 rpm. that's why an open differential gets stuck. the line that makes it work: "Before you draw anything, write the model as pure functions of one input. Check the numbers by hand and show me the check." all 9 prompts
The prompt behind it.
The creator has not shared a public prompt. Visit the original post for more about this work.
Video and prompt by Cortex. Original post ↗


